Riddhi Siddhi Impex

301 stainless strip and slit coil, is slightly lower in chromium and nickel content than Type 302. The lower nickel content causes Type 301 to work harden more rapidly and retain greater ductility than the same temper of Type 302. Gibbs stocks 301 Stainless Strip in gauges from 0.0019″ to 0.050″ precision slit to widths from 0.024″ to 12″. Type 301 is available in a variety of tempers including 1/4 hard, 1/2 hard, 3/4 hard, full hard, extra full hard, and high yield 270 ksi min tensile, and 301 high silicon.

• Gauges From: 0.0015”- .062” / 0.0381mm – 1.57mm
• Widths From: 0.024” – 24” / 0.6096mm – 609.6mm
• Round, Safety, Broken Corner, and Square Edging Available
• Wide Variety of Spool/Winding Options Including Ribbon Wound or, Oscillate Reels and Spools,
• Exceptionally Close Precision Slit Tolerances
• Supplying Industries Including Automotive, Electronics, Oil & Gas, Aerospace, Medical, Fastener, Springs, Commercial, Power Generation, and More

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: mumbai
• Production Capacity: 100tons
• Delivery Time: 7 days

Stainless Steel Strips Grade:AISI 200, 300 & 400 series.Thicknes:0.15 mm to 3.50 mmWidth:250mm to 750 mm (Mill Edge)
 5.0mm to 750 mm (Slit Edge)Finish:2D Cold rolled stainless steel strips annealed & pickled
 2B Cold rolled stainless steel strips annealed & skin passed
 2R work harden for specific hardnessHardness:Annealed-pickled(soft), 1/4 hard, 1/2 hard, 3/4 hard & full hard
 (as rolled)Weight:50 kg to 4 M.T.Coil ID:150 mm to 510 mm depending on thickness & width of coil.Length:In Coil Form.Tolerance in
 Weight:Max 6.5 kg per mm width of strips depending on required
 thickness & widht of the coil.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: mumbai
• Production Capacity: 1000tons
• Delivery Time: 3/4 days

Stainless Steel Slitting Coils is generally considered to be weldable by the common fusion and resistance techniques. Special attention should be given to avoid brittle weld fractures during fabrication; this includes minimizing discontinuities, maintaining low weld heat input, and occasionally warming the part somewhat before forming. Stainless Steel Slit Coils 409 is generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade 409. A major difference can be attributed to the addition of alloy, to control hardening which results in the need for higher heat input during welding.

Grade: 301 , 304 , 304L , 309, 301, 316, 316L, 316TL , 317 ,317L , 321, 347, 409, 410, 420, 439, 441, 444.   

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: mumbai
• Production Capacity: 1000tons
• Delivery Time: 7 days

If you are looking for precision and thickness, you will find it both in our 301 Stainless Steel Slit Coils. It is normally used for applications where intermittent heating at 1040 degree C is required. This steel is also known to resist oxidation in continuous heating process at a temperature up to 1150 degree C. Stainless Steel Slit Coils are normally used for oil burner parts, furnace parts, heat exchangers.
Available Grade: 201 , 202 , 301 , 304 , 304L , 309, 301, 316, 316L, 316TL , 317 ,317L , 321, 347, 409, 410, 420, 439, 441, 444.

Additional Information:

• Delivery Time: 3/4 days

321 Stainless Steel Sheet, Coil, Plate & Bar - AMS 5510, 5645
General Information
Chemical Composition
Physical Properties
Mechanical Properties
321 Stainless Steel
 
321 Data Sheet
 
 
Live chat about 321
 
Get a quote request on 321 sheetGet a quote request on 321 coilGet a quote request on 321 plateGet a quote request on 321 bar
View our most recent White Paper
Which Materials are the Best Fit for Your Heat Exchanger Application?
321 is a titanium stabilized austenitic chromium-nickel stainless steel which was developed to provide an 18-8 type alloy with improved intergranular-corrosion resistance. This material is stabilized against chromium carbide formation by the addition of titanium. Since titanium has a stronger affinity for carbon than chromium, titanium carbide precipitates within the grains instead of forming at the grain boundaries. 321 stainless steel should be considered for applications requiring intermittent heating between 800ºF (427ºC) and 1650ºF (899ºC), or for welding under conditions which prevent a post-weld anneal.  321 stainless steel is non-magnetic.
We supply 321 stainless steel sheet in a variety of lengths and widths and can custom cut to your exact specifications. Our stainless steel coil can also be slit to your desired width.

Additional Information:

• Delivery Time: 3/4 days

Additional Information:

• Delivery Time: 3/4 days

Specialized in Stainless steel Strips / Coils / Slits / Shims / Foils / Sheets 
Thickness from 0.03 mm to 4.00 mm In All Hardness Width Above - 3.0mm to 1500mm
Grades - 301 , 304 , 304 L , 309 , 310s , 316 L , 317 L , 321 , 347 , 409 , 410 , 430 , 439 , 441 , 904 L , Duplex , SMO , Titanium , Monel , Alloy 20 , Inconel , Hastelloy , Nickel 

Tolerance in
 Weight:Max 6.5 kg per mm width of strips depending on required
 thickness & widht of the coil.Grade:AISI 200, 300 & 400 series.Thicknes:0.15 mm to 3.50 mmWidth:250mm to 750 mm (Mill Edge)
 5.0mm to 750 mm (Slit Edge)Finish:2D Cold rolled stainless steel strips annealed & pickled
 2B Cold rolled stainless steel strips annealed & skin passed
 2R work harden for specific hardnessHardness:Annealed-pickled(soft), 1/4 hard, 1/2 hard, 3/4 hard & full hard
 (as rolled)Weight:50 kg to 4 M.T.Coil ID:150 mm to 510 mm depending on thickness & width of coil.Length:In Coil Form.
Stainless Steel Strips 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: mumbai
• Delivery Time: 7 days

Additional Information:

• Production Capacity: 100 TONS
• Delivery Time: 10 DAYS

We Import and Supply Stainless Steel Coils Shims Foils Slit Coils Strip Coils in 201 202 301 304 304L 316L 310 321 317 347 2205 Duplex 409 401 430 439 441 Grades We also deal in high grade materials like Nickel Alloy Inconel Monel Hastelloy Titanium

We Import and Supply Stainless Steel Coils Shims Foils Slit Coils Strip Coils in 201 202 301 304 304L 316L 310 321 317 347 2205 Duplex 409 401 430 439 441 Grades We also deal in high grade materials like Nickel Alloy Inconel Monel Hastelloy Titanium

Additional Information:

• Delivery Time: 7 days

We Import and Supply Stainless Steel Coils Shims Foils Slit Coils Strip Coils in 201 202 301 304 304L 316L 310 321 317 347 2205 Duplex 409 401 430 439 441 Grades We also deal in high grade materials like Nickel Alloy Inconel Monel Hastelloy Titanium

We Import and Supply Stainless Steel Coils Shims Foils Slit Coils Strip Coils in 201 202 301 304 304L 316L 310 321 317 347 2205 Duplex 409 401 430 439 441 Grades We also deal in high grade materials like Nickel Alloy Inconel Monel Hastelloy Titanium

Tolerance in
 Weight:Max 6.5 kg per mm width of strips depending on required
 thickness & widht of the coil.Grade:AISI 200, 300 & 400 series.Thicknes:0.15 mm to 3.50 mmWidth:250mm to 750 mm (Mill Edge)
 5.0mm to 750 mm (Slit Edge)Finish:2D Cold rolled stainless steel strips annealed & pickled
 2B Cold rolled stainless steel strips annealed & skin passed
 2R work harden for specific hardnessHardness:Annealed-pickled(soft), 1/4 hard, 1/2 hard, 3/4 hard & full hard
 (as rolled)Weight:50 kg to 4 M.T.Coil ID:150 mm to 510 mm depending on thickness & width of coil.Length:In Coil Form.
Stainless Steel Strips 

Additional Information:

• Delivery Time: 7 days